Bumper hangs lower on one side

2010 NISSAN TITAN
91,900 MILES • 5.6L • V8 • 4WD • AUTOMATIC
Avatar
DHATLEY42
  • MEMBER
  • 1 POST
Hi My Titan's front bumper seems to be hanging lower on one side than the other. It's never been wrecked and its never been hung up on anything. It's a very well taken care of vehicle. Could this be screws coming loose and how would I quickly fix this?
Dec 5, 2014 at 6:21 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
the bolts/nuts cold be coming loose if they are use some blue Loctite on the threads and tighten them back up and they shouldn't loosen again unless there is a problem of sometype like a broken weld nut in the frame. Also check for cracked brackets.
Dec 5, 2014 at 7:11 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
one other thing I forgot is to have a pro check front end components you may have broken a ball joint on the lower side which if that is the case the truck should not be driven and towed to get repaired.
Dec 5, 2014 at 7:37 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.