2006 Buick Rendezvous Cruse Contol Problem

2006 BUICK RENDEZVOUS
76,980 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
DANDAMAN
  • MEMBER
  • 3 POSTS
In the past when the car hit a bump the cruse control would disengage. Sometimes it would not engage.Later it would work ok. Now the cruse cintrol will not engage regardless of the speed.
Nov 28, 2009 at 3:27 PM
Advertisement
Avatar
MERLIN2021
  • ✓Experienced Mechanic
  • 17,250 POSTS
Two things we need to know, engine size?
And can you get it scanned for codes? Autozone does it free write down codes and post with engine size, there are two different systems depending on engine.
Nov 28, 2009 at 11:40 PM
Avatar
DANDAMAN
  • MEMBER
  • 3 POSTS
engine 3.5

no code appear in on board computer check

Cruse control no longer engages regardless of speed.
Nov 29, 2009 at 2:58 PM
Avatar
MERLIN2021
  • ✓Experienced Mechanic
  • 17,250 POSTS
Check to see if the brake lights work, and if the transmission range switch, or old term neutral saftey switch, how good are you with testing automotive circuits? Have a test light and DVOM?
Nov 30, 2009 at 5:56 AM
Avatar
DANDAMAN
  • MEMBER
  • 3 POSTS
Brake lites work ok. I have an electronics background. Trans column switch seems ok.
What should I check. Is there a speed sensor and where.
dan
Nov 30, 2009 at 6:03 AM
Avatar
MERLIN2021
  • ✓Experienced Mechanic
  • 17,250 POSTS
Dan I sent you an email with a troubleshooting chart(3) wiring diagram, and control unit locations and diagrams, let me know how it goes!
Nov 30, 2009 at 6:18 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.