1989 Buick Park Avenue after rebuilding the cylinder heads

1989 BUICK PARK AVENUE
150,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
CCN1983
  • MEMBER
  • 1 POST
I had the cylinder heads rebuilt. reinstalled everything, and when i started it it tried to turn over but sounded like it was not get gas. i cracked it and as soon as it turned over a pressed the gas pedel. it
cut out with a "pop" sound coming from the air filter with tiny bit of smoke coming also from the air filter.
Feb 11, 2010 at 11:43 AM
Advertisement
Avatar
DOCFIXIT
  • ✓Experienced Mechanic
  • 18,828 POSTS
What proceedure was used to set valve clearence? plug wires on correct?
Feb 12, 2010 at 5:21 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.