2000 Buick Lesabre CAN'T GET A COMPUTER READING

2000 BUICK LESABRE
81,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
MACKAE
  • MEMBER
  • 2 POSTS
SERVICE ENGINE LIGHT CAME ON. TOOK IT TO HAVE CODE READ BUT GUY SAID FUSE WAS BLOWN AND COULDN'T READ IT. PULLED ALL THE SMALL FUSES AND THEY ALL LOOK GOOD. ALSO INTERIOR LIGHTS DO NOT COME ON WHEN DOOR IS OPENED BUT MAP LIGHTS WORK WHEN YOU PUSH THEM ON
Jun 8, 2010 at 5:26 PM
Advertisement
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
First of all thank you very much for your donation.Do you have a limited or custom model?I was looking at the limited wire diagram and look's like if you have that model i would check your ALDL fuse 10 amp located in your rear fuse box.Let me know which model you have so i can get you the correct information.
Jun 8, 2010 at 5:55 PM
Avatar
MACKAE
  • MEMBER
  • 2 POSTS
it is a custom series.
Jun 8, 2010 at 6:39 PM
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
I emailed you the wire diagram for the obd2 connector and circuit's.Also emailed you the rear fuse box legend's so you know what fuse's are what.Also emailed you where and what it look's like.The rear fuse box is located under the rear seat look in the rear fuse box legend part1 looks like you want fuse number 4 which is your ALDL that's the one that send's power to where you read your code's.Also check your other fuse's while your in there let me know what you find.
Jun 8, 2010 at 7:25 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.