Brake problems after replacing master cylinder

2000 CHEVROLET BLAZER
165,000 MILES • 4.3L • 6 CYL • RWD • AUTOMATIC
Avatar
JEANNIE SATORIS
  • MEMBER
  • 1 POST
Replaced master cylinder. Bled brakes but no braking action. Brake pedal soft and goes to floor. We have repeated the process with no luck. What could be the problem?
Jun 4, 2016 at 3:21 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
air in system especially with abs. rent a power bleeder from a rent shop and try bleeding a couple of quarts through system if it still does it a professional will need to hook up a professional grade scanner to open all valves in abs unit.
Jun 4, 2016 at 3:40 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.