I had to replace the brake line on the right side. I have bled it but I cannot get the drivers side bled screw loose.
Sep 30, 2019 at 3:02 PM
Brake pedal is low and soft
2003 FORD F-150
STEVE FINDLAY
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Good evening.
You can try adding some heat from a torch to the area around the bleed screw and see if it comes loose.
If it does not, you will need to replace the caliper.
https://www.2carpros.com/articles/brake-caliper-replacement
https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system
Roy
You can try adding some heat from a torch to the area around the bleed screw and see if it comes loose.
If it does not, you will need to replace the caliper.
https://www.2carpros.com/articles/brake-caliper-replacement
https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system
Roy
Mar 10, 2021 at 11:00 AM
Advertisement