Need to know to what degree I turn the cylinder head bolts and torque specs.
Oct 10, 2024 at 12:18 AM
cylinder head bolt torque specs?
2020 CHEVROLET MALIBU
PANCHOJONEZ
- MEMBER
- 1 POST
Advertisement
STRAILER
- ✓ASE Certified Mechanic
- 54,832 POSTS
Here are the cylinder head tightening torque specs and the sequence as well in the images below. These are torque to yield bolts so you will need new ones before reassembly.
first pass: 30 nm (22 lb ft)
final pass: 240 degrees
Check out the images (below). Let us know if you need anything else.
first pass: 30 nm (22 lb ft)
final pass: 240 degrees
Check out the images (below). Let us know if you need anything else.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Oct 10, 2024 at 1:08 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.