1991 BMW 535i will not start

1991 BMW 535I
150,000 MILES • 6 CYL • AWD • AUTOMATIC
Avatar
GEO451
  • MEMBER
  • 1 POST
I had a fualty fuel pump, changed it out, and i have tested the fuel lines to the fuel rail. I recive gas to the fuel rail, car cranks but will not turn over. how can i check if the fuel is passing through the injectors or, if the fuel pressure regulator is fualty?
May 6, 2009 at 12:43 AM
Advertisement
Avatar
DOCHAGERTY
  • ✓ASE Certified Mechanic
  • 9,606 POSTS
  • ASE Certified Mechanic
Test the fuel pressure at the line going into the fuel rail. Use a noid light to see if there is a injection signal.
May 27, 2009 at 5:46 PM
Avatar
YORKERMILES
  • MEMBER
  • 2 POSTS
I am having the same problem I suspect.Fuel goes to the injectors but does not get injected into the engine as a result I am not getting a spark too.I have noticed my coolant sensor was damaged and I am waiting for the replacement,have you looked at yours?
Jun 15, 2009 at 1:21 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.