1998 BMW 318 Check Engine Light

1998 BMW 318
Avatar
RYAN82586
  • MEMBER
  • 11 POSTS
Engine Mechanical problem
1998 BMW 318 6 cyl Two Wheel Drive Manual 160k miles
----------------------------------------------------------------
My check engine light has recently come on. I tried erasing the stored code by pulling the positive on my battery for a few seconds. Check engine light remained on directly at start up. I was wondering if there is a way to get the codes from the Data Link Connector without having a Peake or OBD or other diagnostic tool. I have a suspision that this is possible, because unknown by many, I know a way of simply reseting the oil service and inspection service lights without having a tool at all. Just some common things I could find around the house.
There must be a way. I'm thinking that if you ground a certain terminal (or several) in the data link connector and then turn the ignition to position 2 that the check engine light will blink a series of codes with pauses, short blinks, and long blinks or something to that affect. What are your thoughts?
Also, my car has been sucking down more coolant then usual, maybe this will help.
Thanks!
Mar 4, 2008 at 3:39 PM
Advertisement
Avatar
DONZILLA
  • MEMBER
  • 2 POSTS
Sucking down coolant? Have you checked your oil to see any milky residue or done a compression test recently? I'd do that and go from there.
Mar 7, 2008 at 1:25 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.