The reverse functions works and the manual selection also works.
What could be the problem?
Thank you
What could be the problem?
Thank you
Feb 1, 2020 at 11:02 AM
Not able to change gear when it is on Drive D
2009 MITSUBISHI PAJERO
MBIR
- MEMBER
- 18 POSTS
Advertisement
JACOBANDNICKOLAS
- ✓ASE Certified Mechanic
- 110,194 POSTS
Hi,
First this vehicle isn't offered in the US, so my technical information is very limited. However, I will try my best to help.
Have you checked the transmission fluid level and condition? Also, is the check engine light staying on while the engine is running?
If the fluid is low, that can cause problems. Also, if the check engine light is on, you really should have computer scanned for diagnostic trouble codes. Here is a quick video showing how it is done:
https://youtu.be/YV3TRZwer8k
I realize most people don't own a scanner, but often times a parts store will do it free of charge or lend/rent a scanner.
Let me know what you find or if you have other questions.
Joe
First this vehicle isn't offered in the US, so my technical information is very limited. However, I will try my best to help.
Have you checked the transmission fluid level and condition? Also, is the check engine light staying on while the engine is running?
If the fluid is low, that can cause problems. Also, if the check engine light is on, you really should have computer scanned for diagnostic trouble codes. Here is a quick video showing how it is done:
https://youtu.be/YV3TRZwer8k
I realize most people don't own a scanner, but often times a parts store will do it free of charge or lend/rent a scanner.
Let me know what you find or if you have other questions.
Joe
Feb 2, 2020 at 8:06 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.