1999 S-10 Clutch

1999 ALL OTHER MAKES ALL OTHER MODELS
Avatar
TRUCKLOVER99
  • MEMBER
  • 2 POSTS
I just had a complete new (not recond) clutch installed. The clutch engages right off the floor. I understand there is no adjustment. The truck has a 4.3 V6. THe slave cyl. was not leaking and the mechanic bleed the system thoroghly. What do I need to check for now. Thanks, Mark in Texas
Mar 1, 2007 at 10:30 PM
Advertisement
Avatar
CHEVY22
  • CERTIFIED EXPERT
  • 1,375 POSTS
hi.
there are alot of things it could be , you mechanic shoulnt have let you leave that way , if he had the flywheel cut they may have cut too much or it wasnt cut at all , there still could be air in the system , or you could have a faulty pressure plate (weak or too stiff fingers),
you paid good money im sure to have the work done and are entitled to a working vehicle , my suggestion would be to take it back , have him pay for a rental until it gets fixed right , any shop with a reputation would step up to the plate

thanks
jim

if you are happy with the info please leave feedback we all here do this for free feedback is a way of saying thank you for the help
Mar 2, 2007 at 5:35 AM
Avatar
TRUCKLOVER99
  • MEMBER
  • 2 POSTS
The mechanic made it right. It turned out that the master cylinder was bad. Thanks, for your input.

Mark
Mar 5, 2007 at 4:27 PM
Advertisement
Avatar
CHEVY22
  • CERTIFIED EXPERT
  • 1,375 POSTS
NO PROBLEM
Mar 5, 2007 at 7:53 PM