1968 Questions for all other cars 1968 MGB

1968 ALL OTHER MAKES ALL OTHER MODELS
75,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
PETER BRANNAN
  • MEMBER
  • 1 POST
I have a 1968 MGB with a brake problem. Fluid is escaping, probably from the master cylinder, running down into the driver side floor.
I suspect the seals have failed. Can I replace them myself? I find it difficult to find a garage to work on the car. Thanks.
Aug 13, 2008 at 4:38 PM
Advertisement
Avatar
MHPAUTOS
  • ✓ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
Hi there,

You can't just replace the seals as the bore of the cylinder should be honed if cast or sleeved if alloy, if honed over size cups should be used and as these are getting hard to purchase, your best & quickest fix is to fit a new master cylinder.

Mark (mhpautos)
Aug 13, 2008 at 5:22 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.