Clutch pedal goes to the floor.
Nov 26, 2018 at 10:13 PM
Clutch adjustment
1996 JEEP GRAND CHEROKEE
TOM321
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hello, I am Danny,
It sounds like you are having a problem with the Clutch Slave Cylinder. It is a cylinder used hydraulically to engage the clutch. I have attached a tutorial showing how to replace. After replacement the system will need to be bled. I have also attached a tutorial showing that as well. Hope this helps and feel free to ask any questions if needed. Thanks for using 2CarPros.
Danny-
https://www.2carpros.com/articles/throw-out-bearing-replacement
ttps://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system
It sounds like you are having a problem with the Clutch Slave Cylinder. It is a cylinder used hydraulically to engage the clutch. I have attached a tutorial showing how to replace. After replacement the system will need to be bled. I have also attached a tutorial showing that as well. Hope this helps and feel free to ask any questions if needed. Thanks for using 2CarPros.
Danny-
https://www.2carpros.com/articles/throw-out-bearing-replacement
ttps://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system
Nov 26, 2018 at 10:26 PM
Advertisement