2002 Acura RSX bolts to the cv axles

2002 ACURA RSX
88,000 MILES • 4 CYL • 2WD • MANUAL
Avatar
DS2063
  • MEMBER
  • 1 POST
I can't remove the bolt from the cv axles. I have removed the notch on the bolt but the bolt still didn't move. I've even stood on the breaker bar and the bolt didn't budge but it broke the breaker bar.
Mar 25, 2008 at 11:21 AM
Avatar
BRUCE HUNT
  • ✓Experienced Mechanic
  • 3,754 POSTS
i assume you are talking about the large nut on the end of the axle right? you have knocked back the locking of the nut on the keyway? i assume that you are replacing an axle. i suggest spraying on some solvent to free the nut. if that does not work then a couple of sharp raps with a hammer might loosen the thing. There is always the question of whether you are using a 3/8 or 1/2 inch drive. must use 1/2 inch rachet.
Apr 7, 2008 at 9:08 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle