1990 Acura Integra ignition switch swapped now no power

Hi cracker408,

Did you check the main fuse in underhood fuse box?

i did and it was the 70 but still not turning over, got power but no engine start. Same problem i started with minus the fuse...... replaced starter and ignition switch. Now agian clueless....... replaced main relay and still nothing. All lights come on except car doesn't start, not even a click. Can roll start just not from dead stop.

You mean the dash indicator lights are not showing?

At bottom of this post there is a link "First Things To Check". You would be able to get some idea what to look for.

I replaced main fuse to still get nothing then figures it was starter coil and no money ment bypass. I did hook a button up to it and it works..... but now the flashers and seatbelt dont work, are they a different fuse under hood? been looking but just cant seem to find the answer yet.

The flasher fuse is # 1 in uder dash fuse box.

Automatic seat belt fuse is # 23 in underdash fuse box.

Fuse #25 (40A) in underdash fusebox is for the ignition switch.

You meant if direct voltage to the starter solenoid works? If yes, then it could be the clutch switch or starter that is faulty.

checked those fuses and they looked fine, not blown or broken is there an under the hood fuse linked with tose?

Did you test all those fuse for battery voltage with ignition switch turned ON?