OEM radio is hot to the touch?

183,000 MILES • 4.0L • 6 CYL • 4WD • AUTOMATIC
Avatar
RICH1VA
  • MEMBER
  • 1 POST
I pulled the front trim to expose the radio for cleaning. I placed my hand between the odometer bezel and the side of the radio. The radio was hot. Is this normal?

I bought two more stock radios out of Jeep's and installed and they are hot to the touch.
Jul 12, 2021 at 11:05 PM
Advertisement
Avatar
KASEKENNY
  • ✓Experienced Mechanic
  • 18,907 POSTS
The short answer is yes. I have noticed this as well over the years that radios do get hot. However, all electronic components get hot when they are working as the current flow through the circuit board generates heat.

So it is not uncommon to notice this. The modern radios all have fans built into them just like a computer does. However, these older radio didn't as they just relied on venting the heat. These are noticeably hot because as you can see from the repair process below, they jammed these into a dash that doesn't get much air flow.

So that causes the heat to dissipate slowly and the side of the unit closest to the processor heats up.

As long as the radio is functioning and not shutting off, it is fine.

Please let us know if you have other questions on this. Thanks
Jul 13, 2021 at 3:43 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle