Cylinder two misfire code. Changed wires and plug still losing power and running shaking and timing belt clicking.
May 17, 2018 at 3:57 PM
Advertisement
JIS001
✓Experienced Mechanic
3,412 POSTS
Swap the number two fuel injector with number one. If the misfire follows to number one then the injector is causing the misfire. If you still have a misfire on number two then do a compression check of all cylinders and let us know what the readings are.
May 17, 2018 at 4:01 PM
ANTHONY SNIDER
MEMBER
6 POSTS
Okay, I looked up some stuff about the feeling jacked her’s and I have the same symptoms as my truck so I am going do that after work. I will get back to you soon as I can but someone also told me about maybe a choke sensor?
May 18, 2018 at 2:42 AM
STRAILER
✓Experienced Mechanic
55,732 POSTS
There is no choke sensor. I would start with a compression test.
So I checked everything and all is good! But I forgot that before my misfire code I had a p1443 code (evaporative emission control valve) no flow. So I just check that today and found a kinked hose under manifold. I will fix it and give update about running conditions.
May 22, 2018 at 9:23 AM
STRAILER
✓Experienced Mechanic
55,732 POSTS
Nice work, please let us know what happens.
May 23, 2018 at 3:38 AM
ANTHONY SNIDER
MEMBER
6 POSTS
Pretty upset problem still there! Going to check the timing belt again the guard seems to be rattling and maybe check another vacuum hose!
May 24, 2018 at 2:57 AM
STRAILER
✓Experienced Mechanic
55,732 POSTS
It sounds like the ignition coil has an intermittent problem. I would change the coil and recheck the plugs and wires.
May 24, 2018 at 4:11 AM
ANTHONY SNIDER
MEMBER
6 POSTS
I have changed my coil packs and put new spark plugs, but I will check it again.
May 24, 2018 at 11:36 AM
JIS001
✓Experienced Mechanic
3,412 POSTS
Have you done the injector swap and compression check already? Also, is the misfire all the time or just under load, meaning does it misfire when you hit the gas?