95 Blazer 4X4 rear end swap

Tiny
MLINTON2
  • MEMBER
  • 1995 CHEVROLET BLAZER
  • 4.3L
  • V6
  • 4WD
  • AUTOMATIC
  • 250,000 MILES
I need a new rear end in my 95 s10 blazer 4x4. It has a G80, GT4, 3.73 gear ratio. Drum brakes.
Will a rear end out of a 2000 blazer fit without doing a bunch of extra work and modifications?
I think it's probably disc brakes. Will I need to change any of the brake components under the hood or any brake lines, etc?
I may be able to buy this rig for parts, will the transmission, frontend, and body parts fit mine?
Thanks much for your help
Monday, August 29th, 2016 AT 5:30 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
The rear end may fit but you'll need a different master and abs unit along with pro portioning valve for brakes or you may be able to put your drum brakes on newer axle. If the 95 is OB2 then trans may work only concern is wiring hookup if the same. Front end/body parts check with junkyard as the sheetmetal is different but they will know
Was this
answer
helpful?
Yes
No
Tuesday, August 30th, 2016 AT 5:44 AM

Please login or register to post a reply.

Sponsored links