Turn signals do not work

Hi and thanks for using 2CarPros.com.

First, if the signal switch does not return, the switch is bad and should be replaced. However, the signals should still work.

Take a look at the attached picture. It identifies what each fuse is for. Fuse 6 is the turn signals. It is a 20 amp fuse. Check it first.

Here are links for checking fuses, replacing, and checking for power at the fuse box:

https://www.2carpros.com/articles/how-to-check-a-car-fuse

________________________________________

Check that first and let me know what you find.

Take care,
Joe

Thank you! The fuse and bulbs are all good! Can't find the relay fuse!! Found the relay for the hazard but not for signals! Hazards works!

Welcome back:

The turn signal flasher and hazard warning flasher are two separate plug-in type units. The hazard flasher is located on the relay module (you already found it). The turn signal flasher is on the drivers side in the center of the A/C duct. See the attached picture. If the part numbers are the same between the 4 way flasher and signal flasher, switch them to see if it changes things.

Let me know what you find.