91 ford laser overheated now wont start

1991 FORD LASER
22,000 MILES • 4 CYL • FWD • MANUAL
Avatar
MEGAN73
  • MEMBER
  • 5 POSTS
hi i heard a ticking noise in my car whilst driving and noticed it was overheating so i pulled over turned it off, i lifted the bonnet and there was steam everywhere i waited till it cooled right down put water in radiator now it wont start, any ideas
Jan 19, 2015 at 10:03 AM
Advertisement
Avatar
CATAFINA
  • Experienced Mechanic
  • 167 POSTS
Check the fuel pressure if its within specs and injectors are pulsing if okay look for spark then let me know
Jan 19, 2015 at 11:58 AM
Avatar
JACOBANDNICKOLAS
  • Experienced Mechanic
  • 110,240 POSTS
When you try to start it, does it sound normal? Have you checked to see if there is spark and fuel to the engine?
Jan 19, 2015 at 8:59 PM
Avatar
MEGAN73
  • MEMBER
  • 5 POSTS
it does the normal rrrrrr but sounds like it wants to go but wont if that makes any sense
Jan 20, 2015 at 11:44 AM
Avatar
JACOBANDNICKOLAS
  • Experienced Mechanic
  • 110,240 POSTS
What about spark and fuel to the engine?
Jan 21, 2015 at 12:32 AM
Avatar
MEGAN73
  • MEMBER
  • 5 POSTS
yes there is spark, could i have cooked the motor and how would i know so
Jan 28, 2015 at 5:15 PM
Avatar
JACOBANDNICKOLAS
  • Experienced Mechanic
  • 110,240 POSTS
You may have blown head gaskets or warped a head causing low compression. Tell me one more thing. Since you have spark, will the engine start with starting fluid?
Jan 28, 2015 at 9:39 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.