Car works fine in 2WD, but when 4x4 button pushed, car will not move at all.
Dec 15, 2018 at 6:32 AM
4x4 button pushed, car will not move at all
JSG1
- MEMBER
- 1 POST
Advertisement
Hi and thanks for using 2carpros.com.
When the car will not move, does it seem to be in neutral? In other words, does the engine rev but the car not move?
I ask because it sounds like the transfer case is shifting into neutral which can be the result of many things. There is an electric actuator on the transfer case that shifts between the different modes of operation. The actuator may be bad, there could be switch failure, there is even an electronic control module related to the system.
I have the diagnostic flow charts, but they are very involved and I don't want to confuse you with information that isn't relevant to this problem.
Let me know.
Joe
When the car will not move, does it seem to be in neutral? In other words, does the engine rev but the car not move?
I ask because it sounds like the transfer case is shifting into neutral which can be the result of many things. There is an electric actuator on the transfer case that shifts between the different modes of operation. The actuator may be bad, there could be switch failure, there is even an electronic control module related to the system.
I have the diagnostic flow charts, but they are very involved and I don't want to confuse you with information that isn't relevant to this problem.
Let me know.
Joe
Dec 15, 2018 at 11:05 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.