SPONSORED LINKS

Four-wheel drive not engaging?

Tiny
PDW
  • MEMBER
  • 2000 CHEVROLET BLAZER
  • 4.3L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 106,000 MILES
The 4WD is not engaging when the button is pressed, however 4x4 button does light up and steadily burn, not flashing. No strange sounds or anything unusual, just won't engage. Thanks in advance.
Tuesday, January 9th, 2024 AT 5:04 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Hi,

There is a vacuum actuator for the front axle under the hood on the passenger side. I need you to inspect the vacuum hoses to and from it for damage, leaks, or if they are disconnected. Follow them to the actuator on the differential. When requesting 4wd, see if there is a vacuum provided.

I attached a pic of the actuator. Note, there should be an electrical connector as well to turn the 4wd light on in the vehicle. Let me know what you find.

Take care,

Joe

See pic below.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 9th, 2024 AT 9:34 PM

Please login or register to post a reply.

Related Transfer Case Selector Switch Content

VIEW MORE

Sponsored links