4x4 stuck in 4 low how to get it unstuck?
Sep 8, 2020 at 4:01 PM
4x4 not working?
DUSTYAE
- MEMBER
- 22 POSTS
Advertisement
Hi,
The first thing I would suggest is to check the linkage at the transfer case to make sure it didn't come disconnected, stuck and so on.
If you look at the attached pics, I highlighted the area of concern. I am basing this on the shift lever in the vehicle is moving. If that is incorrect, let me know. Note that the pics are of the same component from different points of view.
Joe
The first thing I would suggest is to check the linkage at the transfer case to make sure it didn't come disconnected, stuck and so on.
If you look at the attached pics, I highlighted the area of concern. I am basing this on the shift lever in the vehicle is moving. If that is incorrect, let me know. Note that the pics are of the same component from different points of view.
Joe
Images (Click to enlarge)
Sep 9, 2020 at 10:57 AM
Everything is hook up the shift moves and all, but stuck in 4 low.
Sep 9, 2020 at 11:08 AM
Is the shift lever moving on the transfer case?
Joe
Joe
Sep 9, 2020 at 11:19 AM
Yes.
Sep 9, 2020 at 1:41 PM
In addition to the shift lever, make sure the shaft it is mounted to is turning. It is keyed and can slip. (see pic 1)
If that is also turning, Disconnect the linkage and see if it moves further if you do it by hand. Make sure the parking brake on in case you shift it to neutral. If that does nothing, then the transfer case will need removed for inspection internally.
If that is also turning, Disconnect the linkage and see if it moves further if you do it by hand. Make sure the parking brake on in case you shift it to neutral. If that does nothing, then the transfer case will need removed for inspection internally.
Image (Click to enlarge)
Sep 10, 2020 at 11:30 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.