Four wheel drive will not engage, code U140D

2013 RAM 3500
136,000 MILES • 6.7L • 6 CYL • TURBO • 4WD • AUTOMATIC
Avatar
SZALAY
  • MEMBER
  • 3 POSTS
ABS and traction control lights on, truck was stuck in Four wheel drive low and i got it to come out after much switching and back and forth driving. i am now getting a U140D code and service Four wheel drive and Four wheel drive temporarily unavailable. truck will not shift out of two wheel drive.
Apr 6, 2018 at 2:36 PM
Advertisement
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,116 POSTS
U140D - Implausible wheel speed signals received. Most common reason is broken wiring or a bad connection in the wiring to the wheel speed sensors. Finding which one will take a scan tool to watch the way each sensor responds and reports the speed the truck is going. The loss of the signal from any of the wheel sensors will kick the traction control and the ABS off as both use the signals for control.
Apr 8, 2018 at 4:12 PM
Avatar
SZALAY
  • MEMBER
  • 3 POSTS
Steve, you are correct, it was a broken wire on passenger side front ABS sensor. just fixed it. Thank you for your input.
Apr 10, 2018 at 1:24 PM
Advertisement
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,116 POSTS
You are welcome. Glad to hear you found and repaired it.
Apr 10, 2018 at 8:35 PM