Hey, i was just wondering is it okay to not use the bottom gasket on the timing cover and just RTV? please let me know.
Jul 8, 2020 at 9:29 AM
454 timing cover install
1975 CHEVROLET SILVERADO
WESTON454CHEV
- MEMBER
- 19 POSTS
Advertisement
ASEMASTER6371
- ✓ASE Certified Mechanic
- 52,796 POSTS
Good morning,
No, you must use the seal on the bottom on the timing cover. RTV will not work. It will break down and leak all over.
To install it, loosen up the first 2 bolts on the oil pan on both sides by the timing cover. Use a screw driver to pry down slightly on the pan. that will give you enough room to install the timing cover with the seal installed.
Roy
No, you must use the seal on the bottom on the timing cover. RTV will not work. It will break down and leak all over.
To install it, loosen up the first 2 bolts on the oil pan on both sides by the timing cover. Use a screw driver to pry down slightly on the pan. that will give you enough room to install the timing cover with the seal installed.
Roy
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Jul 9, 2020 at 8:03 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.