After replacing solenoid pack vehicle will not move

2003 JEEP LIBERTY
165,000 MILES • 3.7L • 6 CYL • 4WD • AUTOMATIC
Avatar
RICHARD TRAVIS BEAM
  • MEMBER
  • 3 POSTS
42rle transmission. Replaced solenoid pack and now won't move and have to bypass relay to start.

Thanks
Jul 27, 2020 at 4:39 AM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Good afternoon,

Were there any codes stored in the system for you to replace the solenoid pack?

Did it remove before the replacement?

https://www.2carpros.com/articles/automatic-transmission-problems

Did you get the fluid and filter changed?

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

Roy
Jul 27, 2020 at 6:27 AM
Avatar
RICHARD TRAVIS BEAM
  • MEMBER
  • 3 POSTS
Yes, it was the code for faulty shift solenoid.
Yes moved, but once warm if it down shifted on a hill wouldn't shift back up.

Yes, did a fluid (ATF +4) as service manual said, also filter and pan gasket.
Jul 27, 2020 at 9:10 AM
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
Okay, is the code still active? What is the code number?

Roy
Jul 27, 2020 at 10:11 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.