Clicking noise when opening driver door or rolling driver window down?

Tiny
KBLAN010
  • MEMBER
  • 2010 DODGE RAM
  • 6.7L
  • 6 CYL
  • TURBO
  • 4WD
  • AUTOMATIC
  • 147,000 MILES
Hello! I’m new here but I have the truck listed above 2500 Cummings turbo diesel. After the mechanic put in transmission cooling unit, when I open the driver door, I hear a rhythmic ticking along with alarm beep (occasionally) coming from the dash. When I close the door, it stops. Key in or out of ignition, it doesn’t matter. Also, once the driver's window is down, I can hear the clicking. It stops when the window is up. I have checked all blend door actuators except the SOB behind the HVAC system closest to the firewall. All working fine. I’m at a loss! Please provide insight!
Friday, April 21st, 2023 AT 7:19 AM

3 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
Can you tell where the clicking noise is coming from also can you upload a short video of the noise so I can hear it? Also, we should do a CAN scan to see what comes up and it might lead us to the noise. You can get a CAN scanner (Controller Area Network) which will work on most cars from Amazon.

Here is a video to show you how:

https://youtu.be/u-4syLc-ifQ

and

https://www.2carpros.com/articles/can-scan-controller-area-network-easy

Please go over this guide and report back.
Was this
answer
helpful?
Yes
No
Saturday, April 22nd, 2023 AT 10:41 AM
Tiny
KBLAN010
  • MEMBER
  • 2 POSTS
Thank you for the reply! Fortunately, I found my issue, unfortunately I am a special kind of dumb and found it was coming from an external TPMS for my trailer! Thank you again for the prompt response!
Was this
answer
helpful?
Yes
No
Saturday, April 22nd, 2023 AT 5:10 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
Good find. Thanks for letting us know, we are here to help, please use 2CarPros anytime.
Was this
answer
helpful?
Yes
No
Monday, April 24th, 2023 AT 11:24 AM

Please login or register to post a reply.

Sponsored links