i am in need of help me to time the twin cam in the right position of a 2013 ford focus?
Sep 21, 2015 at 4:00 PM
2013 Ford Focus engine issue
2013 FORD FOCUS
BREEC
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
You are going to need some specal
tools in order to get the gears timed right. There is a tool to lock down the cams and a tool to let you know where tdc is. When you have the tools lock the cams in place and the crank in place then remove the crank lock and turn the crank 1 and 3/4 turn clockwise then put the crank lock bolt back in and turn it clockwise till it stops and the timing should be set. If you can't turn the crank 2 full turns you have the cams off line.
tools in order to get the gears timed right. There is a tool to lock down the cams and a tool to let you know where tdc is. When you have the tools lock the cams in place and the crank in place then remove the crank lock and turn the crank 1 and 3/4 turn clockwise then put the crank lock bolt back in and turn it clockwise till it stops and the timing should be set. If you can't turn the crank 2 full turns you have the cams off line.
Sep 22, 2015 at 12:40 AM
Advertisement
I will just add that you must replace the friction discs when you have had the timing gears off.
Sep 22, 2015 at 3:44 AM