I need to remove the valve cover to remove/replace VVT solenoids?

LEON.MCCO92

MEMBER
2013 FORD ESCAPE
2.0L
4 CYL
TURBO
4WD
AUTOMATIC
170,000 MILES

The vehicle listed above has a turbo and I am trying to remove the valve cover to remove/replace VVT solenoids. I am having trouble getting the valve cover off, all bolts are loose, and I've tried very gently prying on it, enough to break the seal but not enough to break the cover or gouge anything. I've seen videos that talk about removing a bracket on the back driver side of the valve pan (which is a real pain) and also videos talking about removing the throttle body. Not sure which would be the most efficient way to do this. Any help would be appreciated.

5 Replies

JACOBANDNICKOLAS

MECHANIC
109,747 POSTS

Hi,

There is a bracket on the rear that holds the wiring. It needs to be removed. Also, be careful when removing this to avoid damage to the metal.

If you look below, I attached the directions for removing and replacing the valve cover. It is extensive, but I believe you already have a lot done.

Additionally, I highlighted and circled the pic that I believe is what you are looking for. It is the last pic listed. Also, the directions include torque spec and sequence for tightening things.

Let me know if this helps or if you have questions.

Take care,

Joe

See pics below.

Images (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

+1

Saturday, August 27th, 2022 AT 9:18 PM

LEON.MCCO92

MEMBER
8 POSTS

I appreciate the help, Joe! I was actually able to get the valve cover off. Unfortunately, at the cost of destroying the seals around the VVT (VCT) solenoids. You wouldn't happen to have a part number to replace those would you? I can't seem to find the right ones.

Was this

answer

helpful?

Yes

No

Sunday, August 28th, 2022 AT 12:26 AM

JACOBANDNICKOLAS

MECHANIC
109,747 POSTS

Hi,

Are you referring to the o-ring that attaches to the solenoid?

Joe

Was this

answer

helpful?

Yes

No

Sunday, August 28th, 2022 AT 7:21 PM

LEON.MCCO92

MEMBER
8 POSTS

Yes.

Was this

answer

helpful?

Yes

No

Sunday, August 28th, 2022 AT 7:26 PM

JACOBANDNICKOLAS

MECHANIC
109,747 POSTS

I don't believe there will be an individual number for that. It normally comes with the new part. However, take a look at what I found below. Mahle is a company that makes gaskets, and this appears to be what you are looking for. It provides all the specs as well.

Let me know.

Joe

Images (Click to make bigger)