Torque specs

2013 CHEVROLET CRUZE
105,000 MILES
Avatar
OSCAR771
  • MEMBER
  • 2 POSTS
What are the torque specifications for the car listed above LS model,1.8 engine. On the head bolts, camshaft engine valve cover bolts, and the camshaft bolt? Also, are the head bolts reusable?
Jun 1, 2018 at 12:38 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good morning.

I attached a chart with all the torque specs you need for your project.

No, the head bolts cannot be reused. they are called torque to yield bolts and are one time use only. If you try to reuse the bolts, they may either break or they will come loose in a short period of time and cause all kinds of issues.

Make sure you follow the tightening sequence exactly so the head lays flat on the block. Use a good quality torque wrench as well.

Roy

Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Jun 1, 2018 at 4:25 AM
Avatar
OSCAR771
  • MEMBER
  • 2 POSTS
Thank you very much. I really appreciate it!
Jun 1, 2018 at 11:50 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Glad to help. Feel free to come back with any follow up questions

Roy
Jun 1, 2018 at 11:51 AM
Avatar
MNSKUNKY
  • MEMBER
  • 3 POSTS
I could not find out within your posted pictures. What is the torque spec for the valve cover?
Jul 24, 2018 at 6:20 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Okay, got them.

2. Install the 11 bolts (2, 3) and tighten to 8 Nm (71 lb in).
Jul 24, 2018 at 6:27 PM
Avatar
MNSKUNKY
  • MEMBER
  • 3 POSTS
Thank you so much!
Jul 24, 2018 at 6:28 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
You are welcome. Glad to help.

Roy
Jul 25, 2018 at 2:12 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Did you respond? I got an email but nothing showed up.

Roy
Dec 22, 2020 at 4:42 AM