How to lower truck two to three inches

2012 FORD F-350
12,000 MILES
Avatar
CCLAUSE29
  • MEMBER
  • 1 POST
I have the truck listed above 4x4 and want to lower it 2-3 inches in the front and back. Does anyone know of a way to do this? Any Kits at all? I know DJM Suspension makes one for 2WD. Its very hard for me to get in and out of my truck. Thanks
Nov 20, 2012 at 9:39 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • CAR REPAIR CONTRIBUTOR
  • 110,190 POSTS
Hi,

With this vehicle, it will be very difficult and not recommended. The biggest problem will be with the rear suspension. The leaf springs are not something that can be lowered other than finding a different, shorter shackle or mounting them reversed on the axle which weakens them and lessens the amount of weight that can be carried. Also, shocks would need replaced and special hardware required to modify the shackle. (see pic 1) As far as the front, people cut coils to make a vehicle lower, but again, it is not recommended on this type of vehicle.

I wish I had an easy solution, but there really isn't one without modifying key components which make this a heavy duty truck.

Take care and let me know if you have other questions.

Joe
Image (Click to enlarge)
Attached Media
May 17, 2020 at 12:48 AM
Advertisement