2011 TOYOTA SIENNA
41,321 MILES
Avatar
NELLIE33
  • MEMBER
  • 2 POSTS
how to replace upper power outlet
Nov 14, 2012 at 5:48 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS

REMOVAL

1. REMOVE NO. 1 SWITCH HOLE BASE
a. Disengage the 4 clips and remove the No. 1 switch hole base.
b. Disconnect the connectors.

2. REMOVE POWER OUTLET SOCKET ASSEMBLY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power outlet socket.

3. REMOVE POWER OUTLET SOCKET COVER
a. Disengage the 2 claws and remove the power outlet socket cover.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Nov 14, 2012 at 7:49 PM
Advertisement
Avatar
NELLIE33
  • MEMBER
  • 2 POSTS

worked just as described, in less than five minutes, old power outlet was out and new one installed.

thank-you
nellie33
Nov 15, 2012 at 1:36 PM
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS
You're welcome.
Nov 15, 2012 at 4:53 PM
Avatar
JOHN ZINKOWSKI
  • MEMBER
  • 1 POST
The replacement process was exactly as described (2013 Toyota Sienna). It took a little patience but the diagrams were very helpful.
Thanks!
John
Apr 14, 2018 at 9:50 AM
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
Good to hear, please use 2CarPros anytime we are here to help.

Cheers, Ken
Apr 16, 2018 at 11:48 AM