how to replace upper power outlet
Nov 14, 2012 at 9:48 AM
2011 Toyota Sienna Replace Upper Power Outlet
2011 TOYOTA SIENNA
NELLIE33
- MEMBER
- 2 POSTS
Advertisement
REMOVAL
1. REMOVE NO. 1 SWITCH HOLE BASE
a. Disengage the 4 clips and remove the No. 1 switch hole base.
b. Disconnect the connectors.
2. REMOVE POWER OUTLET SOCKET ASSEMBLY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power outlet socket.
3. REMOVE POWER OUTLET SOCKET COVER
a. Disengage the 2 claws and remove the power outlet socket cover.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Nov 14, 2012 at 11:49 AM
worked just as described, in less than five minutes, old power outlet was out and new one installed.
thank-you
nellie33
Nov 15, 2012 at 5:36 AM
You're welcome.
Nov 15, 2012 at 8:53 AM
The replacement process was exactly as described (2013 Toyota Sienna). It took a little patience but the diagrams were very helpful.
Thanks!
John
Thanks!
John
Apr 14, 2018 at 2:50 AM
Good to hear, please use 2CarPros anytime we are here to help.
Cheers, Ken
Cheers, Ken
Apr 16, 2018 at 4:48 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.