Power shift shows transmission limited function

Tiny
WAQAR341
  • MEMBER
  • 2011 FORD GALAXIE
  • 2.0L
  • AUTOMATIC
  • 102,000 MILES
When my car's engine is cold it will not go into third gear. Also, will show transmission limited function. After that when I switch off engine and restate again it works normal.
Tuesday, November 4th, 2014 AT 8:33 PM

9 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Hello,

This sound like you have a transmission speed sensor for the input shaft is going bad but to be sure lets run the codes.

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Here is the location of the sensor.

Check out the diagrams (below).

Let us know what happens and please upload pictures or videos of the problem.

Cheers
Was this
answer
helpful?
Yes
No
+3
Wednesday, November 5th, 2014 AT 10:40 AM
Tiny
BOOPERIII
  • MEMBER
  • 1 POST
I had the exact problem with my car and the turbine speed sensor fixed it. Be careful about the wiring connector though they can be brittle.
Was this
answer
helpful?
Yes
No
+13
Wednesday, April 18th, 2018 AT 1:34 PM
Tiny
LEE H
  • MEMBER
  • 7 POSTS
Please Help
I have a 2010 ford galaxy 2.0 EcoBoost titanium.
I was driving yesterday and a warning light came on saying Transmission limited function. I pulled over and turned car off and looked on internet and it said turn car off then on so I did and the warning light never came back on. I have drove it today it seemed ok. But as the warning light came on yesterday it doesn't come on for nothing so I need it checked. When I drive car and put it in reverse the car shudders abit which feels like I'm pushing and releasing brake. Also when I'm sitting at traffic light with foot on brake, when I pull off it hesitates abit before moving.
Was this
answer
helpful?
Yes
No
Friday, January 31st, 2020 AT 9:54 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
The car is going into limp mode. this guide will explain more:

https://www.2carpros.com/articles/reduced-power-limp-mode

Does the car have any codes? This guide will help check:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down these guides and report back.
Was this
answer
helpful?
Yes
No
+1
Saturday, February 1st, 2020 AT 10:41 AM
Tiny
LEE H
  • MEMBER
  • 7 POSTS
Hi, I am taking car to transmission specialist on Monday. Will they get the codes?
Was this
answer
helpful?
Yes
No
Saturday, February 1st, 2020 AT 10:51 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
Sounds good, please let me know what happen we want to get it fixed for you.
Was this
answer
helpful?
Yes
No
+3
Saturday, February 1st, 2020 AT 10:53 AM
Tiny
LEE H
  • MEMBER
  • 7 POSTS
Hi, I took car to a Ford automatic gearbox specialist and it came up with no faults on the gearbox or the car. But today I had the transmission limited function warning light come on. I am completely confused as scan revealed no faults so why did the transmission limited function light come on? Also sometimes the gears crunch when I first start driving it. Please help
Was this
answer
helpful?
Yes
No
+2
Wednesday, May 13th, 2020 AT 12:56 PM
Tiny
LEE H
  • MEMBER
  • 7 POSTS
I have also had transmission oil changed with genuine Ford oil.
Was this
answer
helpful?
Yes
No
+4
Wednesday, May 13th, 2020 AT 2:20 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
It sounds like the input shaft speed sensor is out. To be sure the first thing we need to do is to gather the codes. here is a guide to help us get started on fixing the problem:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down this guide and report back.
Was this
answer
helpful?
Yes
No
-3
Thursday, May 14th, 2020 AT 11:13 AM

Please login or register to post a reply.

Sponsored links