2011 Chrysler Town and Country Starter Circuit

2011 CHRYSLER TOWN AND COUNTRY
Avatar
QIKGTS
  • MEMBER
  • 3 POSTS
Hi. I install interlock and gps devices which have starter kill circuits. I have an appointment coming up for a 2011 Town and Country and I don't think this will be an easy one. If I recall correctly, this vehicle has a wireless ignition switch, in that it doesn't send the typical 12v signals as the key is turned.

Do you know if there is a wire under the dash would trigger a relay under the hood for the starter circuit? I don't need to know about the ignition, as I'm not trying to start the engine. I just want to stop the starter from turning over the engine when the factory key is used.

Thanks in advance... Steve
Mar 6, 2012 at 7:00 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
i would be extremely carefull with this. you could disrupt the security system and cause issues with the bcm.

why dont you call the service manager at a dealer for his input as he should be educated on this system.

Roy
Mar 6, 2012 at 7:55 PM
Avatar
QIKGTS
  • MEMBER
  • 3 POSTS
Thanks for the reply Roy. You wouldn't happen to have access to any wiring diagrams of the starter circuit that I could look at would you? Like for example what the wiring pin out of the starter relay would be?
Mar 6, 2012 at 8:03 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
cant get the schematic. i even tried 2010. i would still try the dealer for the info.

Roy
Mar 6, 2012 at 8:18 PM
Avatar
QIKGTS
  • MEMBER
  • 3 POSTS
Thanks Roy. I appreciate the effort, advice and replies...
Mar 6, 2012 at 8:28 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
good luck
Mar 6, 2012 at 8:33 PM