will only go in reverse

2011 CHEVROLET CRUZE
4 CYL • 2WD • AUTOMATIC
Avatar
JAYSIM32
  • MEMBER
  • 1 POST
My car stopped going forward. It will only go in reverse. When I put it in drive it will not go.
Jan 22, 2015 at 6:02 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STRAILER
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 54,178 POSTS
Hello,

First connected a codes reader to it to see if you have any codes that will let you know that a transmission speed sensor or control solenoid has gone out.

Here is a guide to get you started.


https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

It sounds like you have a 1st gear shift solenoid that needs to be replaced, you will need to remove the transmission pan to do so.

Here is a guide that might help

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

Please run this test and get back to us so we can continue helping you.

Best, Ken
Mar 13, 2017 at 3:06 PM
Advertisement
Avatar
ABED1988
  • MEMBER
  • 1 POST
You where spot on, it was the solenoid I replaced it and now the car runs like new.

Thanks for the help I love this site :)

Jim
Mar 13, 2017 at 3:06 PM (Merged)