2010 Mazda 3 Electrical Problem

2010 MAZDA 3
80,000 MILES • 2.3L • 4 CYL • 2WD • AUTOMATIC
Avatar
ROBPETERJR
  • MEMBER
  • 1 POST
1st wave: Traction Control and ABS MILs on solid and push button start requires multiple cycles to turn off vehicle.
2nd wave: intermittent AC operation briefly then AC stopped working entirely. (AC compressor clutch will not engage and light for the cabin AC button will not light)
Isolated incident: All MILs on after start and vehicle would drive, but no power steering. This went away after the next power off and restart.
3rd Wave: Check Engine MIL on solid. MILs P061B (power train) and U0121 (network). I read the later is insignificant.
Aug 25, 2014 at 8:36 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
a pro needs to scan this to see what is wrong with it the abs automatically turns off the traction control.The U0121 is NOt significant that may be the souce of your problem have a pro look at it soon
Aug 25, 2014 at 9:47 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.