2010 GMC TERRAIN
32,000 MILES
Avatar
MATTANDREOLI116
  • MEMBER
  • 2 POSTS
I'm having issues getting the front brake rotors removed. Everything else is off (calipers, brackets, etc) are these pressed on or is there a trick to them? 2010 gmc terrain
Mar 27, 2013 at 11:32 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
after teh caliper and maybe bracket are out of hte way, put penetrating oil around center then smack rotor on area by studs with hammer. this shold break it loose
Mar 28, 2013 at 1:21 PM
Advertisement
Avatar
MATTANDREOLI116
  • MEMBER
  • 2 POSTS
I tried smacking it with a hammer and it doesn't seem to be rusted. More like something is holding it on. I've done rotors many times but haven't run into this before.
Mar 28, 2013 at 9:00 PM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
sorry my mistake remove the oblt holding it on it may be tapered so you may have to clean rust offf to find it. i've shown a pic included. it will be between two fo the studs. there is only one bolt.
Image (Click to enlarge)
Attached Media
Mar 29, 2013 at 1:46 AM