Advertisement
Advertisement

OEM Air Filter Installation Instructions

2010 FORD F-350
15 MILES
Avatar
CDENEVE1
  • MEMBER
  • 1 POST
Just looking for instructions for installing an Oem air filter
Part Number: 9601 (FA-1886)

Part Description: 6.4L Diesel V8 Twin Turbo




for my 2010 Ford Super Duty F350.
Aug 28, 2012 at 3:49 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
1. Release the toggle clamps and raise the Air Cleaner (ACL) outlet housing.


2. Disconnect the secondary air intake hose from the ACL outlet housing and set the housing aside.


3. NOTICE: Do not use a tool to pry the element from the Air Cleaner (ACL) housing. Failure to follow this instruction may result in ACL and engine damage.


Pull outboard on the top edge of the ACL element and remove the element.
? Discard the ACL element.


nstallation


1. NOTE: Make sure the element is positioned inboard of the stop feature in the ACL housing.


Position a new ACL element into the air cleaner housing.


2. Push the element down and inboard to compress the seal into the ACL housing.


3. Connect the secondary air intake hose to the ACL outlet housing and position the cover on the ACL housing.


4. Secure the 2 toggle clamps.
Image (Click to enlarge)
Attached Media
Aug 28, 2012 at 5:08 PM
Advertisement
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle

Advertisement