I need to replace the bearings and pads
Aug 14, 2014 at 8:25 AM
brake and bearing repair - front
2010 CHEVROLET UPLANDER
BIRT2014
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hello,
The pads can be replaced easily with typical hand tools. Keep in mind that you will need a hub puller in order to remove the hub/bearing.
Here are couple of helpful guides:
https://www.2carpros.com/articles/how-to-replace-front-brake-pads-and-rotors-fwd
https://www.2carpros.com/articles/bearing-hub-replacement
I have attached the replacement procedures below.
Please let me know of any questions.
Thank you.
The pads can be replaced easily with typical hand tools. Keep in mind that you will need a hub puller in order to remove the hub/bearing.
Here are couple of helpful guides:
https://www.2carpros.com/articles/how-to-replace-front-brake-pads-and-rotors-fwd
https://www.2carpros.com/articles/bearing-hub-replacement
I have attached the replacement procedures below.
Please let me know of any questions.
Thank you.
Images (Click to enlarge)
Oct 8, 2021 at 11:25 AM
Advertisement