For a while now, whenever I put the lights on they flicker now they are not working at all. Help?
Jan 23, 2013 at 7:45 PM
Fuse panel not working at all
2010 CHEVROLET COBALT
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
If you look at the attachments below, they provide the fuse box orientations and what each fuse is for.
In addition to just checking a fuse, make sure there is power to it. A fuse may be good and not be receiving power.
Here is a link that you may find helpful when testing:
https://www.2carpros.com/articles/how-to-check-a-car-fuse
I hope this helps. Let me know if you have additional questions.
Take care,
Joe
See pics below.
If you look at the attachments below, they provide the fuse box orientations and what each fuse is for.
In addition to just checking a fuse, make sure there is power to it. A fuse may be good and not be receiving power.
Here is a link that you may find helpful when testing:
https://www.2carpros.com/articles/how-to-check-a-car-fuse
I hope this helps. Let me know if you have additional questions.
Take care,
Joe
See pics below.
Images (Click to enlarge)
Jun 22, 2021 at 10:28 PM
Advertisement