Is it safe to repair a frame on a 2009 Ford Explorer?
Dec 6, 2010 at 5:23 AM
Frame
2009 FORD EXPLORER
ACTIVEJ00
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Steel frames can be pulled straight on a frame machine. If a section has to be welded in, it must be understood there are curves, bends, and dimples that cause it to bend and give in specific places to absorb the forces of a crash. Strengthening those areas could result in a liability issue years later.
Aluminum frames can not be straightened because they will be weakened or crack. Sections must be unbolted or cut out to be replaced. They were also treated to prevent corrosion. That treating will not be present where it has been welded during a repair.
caradiodoc
Aluminum frames can not be straightened because they will be weakened or crack. Sections must be unbolted or cut out to be replaced. They were also treated to prevent corrosion. That treating will not be present where it has been welded during a repair.
caradiodoc
Dec 6, 2010 at 5:29 AM
Advertisement