clutch pedal removal

2009 CHEVROLET COBALT
50,000 MILES • 2.2L • 4 CYL • 2WD • MANUAL
Avatar
IAMRACERX
  • MEMBER
  • 1 POST
how do i remove the clutch pedal? i have taken out the 5 nuts that seem to hold it in. disconnected the cable. disconnected the hydraulic piston. Still it will not come out. Please advise..........
Aug 8, 2014 at 5:44 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
ere I a pic but we have no instructions on removing it. here is pic but it may be hanging up on master for clutch and you may have to remove underhood electrical center.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Aug 8, 2014 at 11:20 PM
Avatar
GUYINKNAPP
  • MEMBER
  • 1 POST
I broke my clutch pedal arm and got a new clutch pedal assembly from the junk yard. I asked if they had tips to get it out he said he just keep taking parts off until he could get at it. I have the two bolt and master cylinder rod off. But the bracket hangs up on the i think power steering pump and bracket. How much needs to come off to get the assembly in and out?
Mar 1, 2021 at 4:08 AM (Merged)
Avatar
STEVE W.
  • ✓Experienced Mechanic
  • 15,255 POSTS
Shouldn't need to remove much. Basically you disconnect the master cylinder rod. the two nuts come off and the wiring and the pedal bracket should drop down and come out.
If the steering assist motor is in the way it is held on with just the two bolts.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Mar 1, 2021 at 4:08 AM (Merged)
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.