Clutch pedal removal

IAMRACERX

MEMBER
2009 CHEVROLET COBALT
2.2L
4 CYL
2WD
MANUAL
50,000 MILES

How do I remove the clutch pedal? I have taken out the 5 nuts that seem to hold it in. Disconnected the cable. Disconnected the hydraulic piston. Still it will not come out. Please advise.

Saturday, August 9th, 2014 AT 12:44 AM

3 Replies

HMAC300

MECHANIC
48,601 POSTS

Ere I a pic but we have no instructions on removing it. Here is pic but it may be hanging up on master for clutch and you may have to remove underhood electrical center.

Image (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Saturday, August 9th, 2014 AT 6:20 AM

GUYINKNAPP

MEMBER
1 POST
2007 CHEVROLET COBALT
2.2L
4 CYL
2WD
MANUAL
111,111 MILES

I broke my clutch pedal arm and got a new clutch pedal assembly from the junk yard. I asked if they had tips to get it out he said he just keep taking parts off until he could get at it. I have the two bolt and master cylinder rod off. But the bracket hangs up on the I think power steering pump and bracket. How much needs to come off to get the assembly in and out?

Was this

answer

helpful?

Yes

No

-1

Monday, March 1st, 2021 AT 12:08 PM (Merged)

STEVE W.

MECHANIC
13,573 POSTS

Shouldn't need to remove much. Basically you disconnect the master cylinder rod. The two nuts come off and the wiring and the pedal bracket should drop down and come out.
If the steering assist motor is in the way it is held on with just the two bolts.

Image (Click to make bigger)