2008 Toyota Tundra Upgraded radio

2008 TOYOTA TUNDRA
98,000 MILES • 5.7L • V8 • RWD • AUTOMATIC
Avatar
NICK473
  • MEMBER
  • 1 POST
I recently upgraded my radio from the 86120-0C191 to the 86120-0C310. I did this so I could stream audio over the Bluetooth. One of the connectors does not match to the new radio and now the off hook/dial buttons and the Push to talk button do not function. I had this functionality with the old radio. When I go to the BT source it says BT AUDIO PLAYER NOT FOUND. Obviously the dangling wire in the back is the culprit. Is there a harness I can buy to fix this? Or can someone tell me the pin out of the cables for each so I can try to splice something together?

Thanks.
Jul 25, 2014 at 9:28 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
try a radio install place we normally don't mess with radios
Jul 25, 2014 at 12:08 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.