Windshield wiper problem

2008 MAZDA 3
74,000 MILES
Avatar
MARKT
  • MEMBER
  • 3 POSTS
Windshield wipers shuddered, slowed, and came to a halt mid-wipe on my 2008 Mazda 3. Switch has no effect now. Possibilities for troubleshooting?
Mar 14, 2011 at 4:12 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
FIXITMR
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,990 POSTS
remove and refit the connectors? tap motor to see if it moves again? brushes may be worn down.
Mar 14, 2011 at 4:17 PM
Advertisement
Avatar
MARKT
  • MEMBER
  • 3 POSTS
Thanks. At least I have a sunny day to try.
Mar 14, 2011 at 4:27 PM
Avatar
FIXITMR
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,990 POSTS
yah the sun has arrived here too! another thing to check is the motor/assembly ground. see if ther's an actual ground strap or just cross screwdriver from motor bracket to mount bolt.
Mar 14, 2011 at 10:19 PM
Avatar
MARKT
  • MEMBER
  • 3 POSTS
Thanks. Tried the suggestions. Had to take to dealer. Learned that the motor is back ordered. Leads me to believe this is a widespread issue for this model year. Safety recall down the road?
Mar 16, 2011 at 5:28 PM