My question is how to replace the fuses and where are they? Thank you.
Nov 25, 2013 at 3:17 PM
how to replace the fuses?
2008 HONDA CRV
MJNEACY
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Hi,
Checking and replacing fuses really isn't a difficult job to perform. However, the one thing that people often miss is this. A fuse may appear to be good and still be bad. Also, a fuse can be good, but there is no power to it.
So, it is important to not only inspect the fuse itself but also check to confirm there is power to and from it.
Here is a link that explains in detail how it's done:
https://www.2carpros.com/articles/how-to-check-a-car-fuse
If you look below, I attached the fuse box information and legends related to each.
I hope this helps. Let me know if you have other questions.
Take care,
Joe
See pics below.
Checking and replacing fuses really isn't a difficult job to perform. However, the one thing that people often miss is this. A fuse may appear to be good and still be bad. Also, a fuse can be good, but there is no power to it.
So, it is important to not only inspect the fuse itself but also check to confirm there is power to and from it.
Here is a link that explains in detail how it's done:
https://www.2carpros.com/articles/how-to-check-a-car-fuse
If you look below, I attached the fuse box information and legends related to each.
I hope this helps. Let me know if you have other questions.
Take care,
Joe
See pics below.
Images (Click to enlarge)
Jul 4, 2021 at 10:03 PM
Advertisement