2008 Honda Accord 3 5 V6 Coolant Leak Water Pump O Ring Block Seal Dealer

2008 HONDA ACCORD
12,158 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
2008 Honda accord 3.5 V6 coolant leak from Water Pump O-ring to block seal. Dealer installed first pump and timing belt. I replaced the water pump O-ring and timing belt still leaked. I removed the O-ring and used Loctite 598 still leaks. Motor runs fine no power issues or idle issues I have no water in the oil or signs of it burning it and It does not run hot. Any help would be appreciated Thank You.
Keith
Nov 3, 2012 at 4:57 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
are you sure it is not leaking from the vent hole in the pump????

Roy
Nov 3, 2012 at 7:59 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.