6.4 diesel no power code B1202

2008 FORD F-350
38,000 MILES
Avatar
BADLANDSINC
  • MEMBER
  • 3 POSTS
2008 f350 with 6.4 no power and black smoke with blue tint only when accelerating, pulled a dtc of B1202 and U0100 and U0115
Jul 1, 2011 at 6:19 PM
Advertisement
Avatar
RACEFAN966
  • ✓ASE Certified Mechanic
  • 5,029 POSTS
  • ASE Certified Mechanic
Have you done anything at this point? I will look up the codes and we will go from there. Ok these are loss of comunication codes (u0100 adn u0115), so clear the codes and lets see if any come back. The b1202 is fuel sender circuit. Clear the codes and let me know if any come back.
Jul 1, 2011 at 7:56 PM
Avatar
BADLANDSINC
  • MEMBER
  • 3 POSTS
i took off the dpf and pipe and it has lots of power now.. i have a straight pipe for the dpf delete kit with all three new sensors.. i have sct livewire programming the dpf delete right now, take about 20 minutes and ill let you know.. thanks
Jul 1, 2011 at 10:30 PM
Avatar
BADLANDSINC
  • MEMBER
  • 3 POSTS
would that fuel sender circuit be the fuel level guage ? Cause my fuel guage says empty but i just filled up
Jul 1, 2011 at 10:31 PM
Avatar
RACEFAN966
  • ✓ASE Certified Mechanic
  • 5,029 POSTS
  • ASE Certified Mechanic
Yes it could be. Do you have a digital multi meter and would be willing to check a couple of things? Get back to me and we will go from there.
Jul 7, 2011 at 2:17 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.