What type of tools are needed to remove the ignition coils
Nov 3, 2012 at 4:12 PM
2008 Dodge Caliber Type Tools Needed Remove Ignition Coils
2008 DODGE CALIBER
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
ASEMASTER6371
- ✓ASE Certified Mechanic
- 52,796 POSTS
REMOVAL
The electronic ignition coil attaches directly to the valve cover.
Remove the negative battery cable.
Disconnect electrical connector from ignition coil.
Remove ignition coil mounting bolts.
Remove ignition coil.
since you provided no engine size, i assume it is a 1.8
8mm socket, rachet, 6 inch extension.
10mm socket.
screw driver and pliers
Roy
The electronic ignition coil attaches directly to the valve cover.
Remove the negative battery cable.
Disconnect electrical connector from ignition coil.
Remove ignition coil mounting bolts.
Remove ignition coil.
since you provided no engine size, i assume it is a 1.8
8mm socket, rachet, 6 inch extension.
10mm socket.
screw driver and pliers
Roy
Nov 3, 2012 at 4:15 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.